Browse Learn

Filmclusive Encyclopedia

Safety

Film production roles, equipment, workflows, and terms.

300 entries ยท Page 2 of 5

  • Driving plan

    A production safety plan covering authorized drivers, vehicles, routes, schedules, loads, communications, and foreseeable road hazards.

  • Drone safety

    Operational controls for unmanned aircraft used in filming, surveying, lighting, or event production.

  • Dropped-object prevention

    Planning and controls that keep tools, hardware, and equipment from falling from elevated work or suspension.

  • Dummy round

    An inert cartridge-shaped prop intended to appear loaded while containing no primer or propellant.

  • Dynamic load

    A force that changes due to acceleration, impact, movement, vibration, or sudden stopping.

  • Electric arc

    A sustained electrical discharge through a gas such as air.

  • Electric circuit

    A complete conductive path through which electric current can flow.

  • Electric current

    The movement of electric charge through a conductor, measured in amperes.

  • Electric power

    The rate at which electrical energy is transferred or consumed, measured in watts.

  • Electrical bonding

    The intentional connection of conductive parts to establish reliable electrical continuity.

  • Electrical burn

    Tissue injury caused by current through the body, an arc, or overheated electrical equipment.

  • Electrical conductor

    A material or purpose-built component intended to carry electric current continuously.

  • Electrical enclosure

    A cabinet or housing that protects electrical parts and limits access or environmental exposure.

  • Electrical guarding

    Placement or enclosure of live parts to prevent accidental contact by unqualified people.

  • Electrical impedance

    Opposition to alternating electric current combining resistance with frequency-dependent reactance.

  • Electrical insulation

    Nonconductive material surrounding or separating energized parts to prevent unintended current paths.

  • Electrical insulator

    A material that strongly resists electric-current flow under its rated conditions.

  • Electrical load calculation

    A documented estimate of current and power required by connected production equipment.

  • Electrical panel

    An enclosure containing circuit protection and distribution equipment that must remain accessible and identified.

  • Electrical polarity

    The identified relationship among conductors or terminals that must be connected in the intended orientation.

  • Electrical raceway

    An enclosed channel designed to contain conductors, cables, or busbars.

  • Electrical receptacle

    A contact device installed at an outlet for connection of an attachment plug.

  • Electrical resistance

    Opposition to electric current, measured in ohms for direct-current analysis.

  • Electrical shock hazard

    A dangerous condition in which current may pass through a person contacting different electrical potentials.

  • Electrical tie-in

    A temporary connection made directly to an electrical service or distribution point.

  • Electrocution

    A fatal injury caused by electrical current or closely related electrical effects.

  • Elevated work platform

    A raised work surface used to support people and their necessary tools or materials.

  • Emergency action plan

    A documented response for evacuation, communication, accountability, medical aid, and emergency coordination.

  • Emergency communications

    The planned methods, contacts, messages, and backups used to report and coordinate an emergency.

  • Emergency drill

    A planned exercise testing emergency roles, communication, movement, equipment, and accountability.

  • Emergency eyewash

    A device providing immediate flushing fluid after hazardous eye exposure.

  • Emergency power off

    A readily identified control intended to remove power rapidly from designated equipment or an area.

  • Emergency safety shower

    A device delivering rapid full-body flushing after significant hazardous-material contact.

  • Energized

    Electrically connected to, or containing energy from, a source of voltage.

  • Energized electrical work

    Work performed on or near exposed live electrical conductors or circuit parts.

  • Engineering control

    A physical or technical measure that isolates people from a hazard.

  • Entertainment chain hoist

    A powered or manual hoist using load chain to lift or suspend entertainment-production equipment.

  • Equipment defect

    A condition or characteristic that weakens or reduces the safe strength or function of equipment.

  • Equipment grounding conductor

    A protective conductor connecting exposed equipment parts to the grounding system.

  • Evacuation route

    A planned unobstructed path leading people from a work or audience area to a safer location.

  • Exclusion zone

    A controlled area kept clear of unauthorized people because hazardous work or load movement is underway.

  • Extension cord

    A flexible cord assembly used to extend power within its rating, environment, and approved use.

  • Fall clearance

    The unobstructed vertical distance required for a fall-arrest system to deploy and stop a worker safely.

  • Fall protection

    A planned combination of guardrails, travel restraint, fall arrest, training, and rescue procedures.

  • Fall restraint

    A system configured to prevent a worker from reaching an unprotected fall edge.

  • Fall-arrest anchorage

    A secure attachment point for a personal fall-arrest system, independent where required from supporting work systems.

  • Fall-arrest lanyard

    A flexible connecting line between a harness and anchorage or deceleration device.

  • Fall-protection connector

    A rated component joining parts of a personal fall-protection system.

  • Fatigue risk

    The increased likelihood of error, injury, or impaired judgment caused by insufficient sleep, long hours, circadian disruption, or demanding work.

  • Feeder cable

    A heavy conductor assembly carrying substantial power from source to downstream distribution.

  • Fire extinguisher

    A portable device containing an extinguishing agent selected for particular classes and sizes of incipient fire.

  • Fire lane

    A designated access route kept available for emergency vehicles and fire-service operations.

  • Fire watch

    A designated person who monitors for ignition hazards and maintains required fire-prevention controls.

  • Fire-alarm interface

    Coordination between production activities and a building fire-detection or notification system.

  • Firearms safety

    The controlled planning and handling practices required whenever firearms or firearm-like props are present in production.

  • First-aid kit

    A stocked and accessible collection of supplies selected for the likely minor injuries and conditions of a worksite.

  • First-aid response

    Immediate trained care provided for illness or injury until further treatment is available.

  • Flammable liquid

    A liquid classified by its flash point and boiling characteristics as presenting a readily ignitable vapor hazard.

  • Floor hole

    A gap or void in a walking-working surface large enough to present a foot, object, or fall hazard.

  • Fog fluid

    A manufacturer-formulated liquid intended for a compatible theatrical fog or haze machine.